Structural Improvement Of Band Saw Machine
Leave a message
The saw wheel is a pair of wheels used to install a band saw machine and is the main component for achieving the main movement. The lower saw wheel of the band saw machine is the driving wheel, which needs to have a large moment of inertia and can act as a flywheel during operation. The upper saw wheel is passive and driven by the saw blade. It is required to be made lighter and synchronized with the saw blade as much as possible, in order to reduce the severe friction and slippage between the saw wheel and blade caused by the starting brake and changes in cutting resistance, and to prevent the saw blade from excessively expanding and breaking.
(1) Quenching and cold work hardening treatment are applied to the surface of the band saw wheel to improve its strength and reduce friction between the saw wheel and the saw blade.
(2) Covering the surface of the saw wheel with rubber with a thickness of 3-5mm can effectively reduce noise. This method is commonly used on small band saws in furniture factories.
(3) Change the structure of the upper saw wheel from a spoke type to a spoke plate type, making it less susceptible to excited vibrations. The spoke type saw wheel adopts an integral casting structure, which eliminates or reduces the airflow rotation noise and eddy current noise generated by the rotation of the spoke type saw wheel, and reduces the overall noise by about 3dB (A).






