Tail Cutting Machinie
HA-11NC sawing machine is a fully automatic tailing material cutting equipment. The following is a detailed introduction of the sawing machine: Product Parameters: Features： √ New automatic material turning mechanism reduces the burden of manual material feeding √ Adjust the track...
Description
HA-11NC sawing machine is a fully automatic tailing material cutting equipment. The following is a detailed introduction of the sawing machine:
Product Parameters:
|
Model |
HA-11NC |
|
Cutting Capacity(mm) |
Φ90(Maximum Sawing Φ110) |
|
Blade Speed(m/min) |
28/43/54/76 |
|
Blade Size(mm) |
27x0.9x3505 |
|
Main Motor(kw) |
2.2 |
|
Hydraulic Motor(kw) |
0.75 |
|
Cooling Motor(kw) |
0.04 |
|
Blade Tensioning Form |
Manual |
|
Vise Clamp |
Hydraulic |
|
Drive |
Worm Gear Drive |
|
Machine Size(L*W*H)(mm) |
1900x2300x1200 |
Features：
√ New automatic material turning mechanism reduces the burden of manual material feeding
√ Adjust the track width according to the size of the material head to avoid material derailment
√ The middle feed structure of the material head fully cuts the material to eliminate waste
√ The servo motor intelligent speed change meets the requirements of fine sawing
√ Automatic alarm for material detection without material, real-time reminder does not affect sawing efficiency
Hot Tags: tail cutting machinie, China tail cutting machinie manufacturers, suppliers, factory, Carbide Cold Saw Blades, Full automatic Bandsaw, Square Column Gantry Band Saw Machine, Pipe Groove Cutting Machine, circular saw machine, Cold Cut Chop Saw Blade
Send Inquiry
You Might Also Like
