Bandsaw Mill Blades
High-speed steel (M42 alloy steel) is usually used. These materials have high hardness, high wear resistance and high red hardness, which can ensure that the saw blade maintains a sharp edge during the cutting process and effectively resist wear and high temperature softening.
Description
Brand Name: M42 Naipusi
|
width(mm) |
Tooth profile |
length(mm) |
||||||||
|
13 |
8/12 |
10/14 |
14/18 |
6 |
14 |
|
|
|
|
Customizable in any length |
|
19 |
3/4 |
4/6 |
5/8 |
6/10 |
8/12 |
10/14 |
6 |
3 |
|
|
|
27 |
2/3 |
3/4 |
4/6 |
2 |
4 |
6 |
3/4T |
4/6T |
3/4H |
|
|
34 |
2/3 |
3/4 |
4/6 |
3/4T |
4/6T |
3/4H |
|
|
|
|
|
41 |
2/3 |
3/4 |
4/6 |
3/4T |
4/6T |
|
|
|
|
|
|
54 |
1.4/2 |
2/3 |
3/4 |
3/4T |
|
|
|
|
|
|
|
67 |
2/3 |
|
|
|
|
|
|
|
|
|
Tooth tip material:
High-speed steel (M42 alloy steel) is usually used. These materials have high hardness, high wear resistance and high red hardness, which can ensure that the saw blade maintains a sharp edge during the cutting process and effectively resist wear and high temperature softening.
Saw band material:
Low alloy spring steel (such as 46CrNiMoVA), this material has good toughness and elasticity, can withstand the bending and stretching of the saw blade during high-speed operation, and prevent the saw blade from breaking.
Common faults and solutions for bimetallic band saw blades：
1. Rough and uneven cross section
Possible causes: blunt teeth, damaged tooth tips, incorrect position of guide arm and workpiece, improper tension, etc.
Solution: Replace new saw blade, adjust the position of workpiece and guide arm, adjust tension, etc.
2. Saw blade breakage
Possible causes: cracking at the bottom, cracking of tooth groove, cracking of weld, etc.
Solution: Check the quality of saw blade, replace damaged parts, adjust cutting parameters, etc.
3. Low cutting efficiency
Possible causes: improper setting of sawing parameters, inappropriate selection of saw blade specifications, etc.
Solution: Adjust sawing parameters, replace saw blades of appropriate specifications, etc.
Hot Tags: bandsaw mill blades, China bandsaw mill blades manufacturers, suppliers, factory, bandsaw blade for welding preparation, wrapped bandsaw blade, chip removal by bandsaw blade, premium bandsaw blade, bandsaw blade for waterjet cutting machines, imported bandsaw blade
Send Inquiry
You Might Also Like
